|
Our forum has over 13 million
photos, videos and .ZIP files.
uploaded by our members!
|
|
#1
|
||||
|
||||
|
Over the last couple of months, this site will not load when I'm connected to starlink - any thoughts?
|
| The Following User Says Thank You to camoj For This Useful Post: | ||
|
#3
|
||||
|
||||
|
Only this site, does not matter what device - no blockers and can access everything else I've tried - it's very strange.
|
| The Following User Says Thank You to camoj For This Useful Post: | ||
|
#4
|
|||
|
|||
|
One possibility is that StarLink assigned you an IP address that has been blocked by us for previously abusing our network.
|
| The Following User Says Thank You to admin For This Useful Post: | ||
|
#7
|
||||
|
||||
|
If your IP address is being blocked for previous misuse then you can find your public IP address from a site like whatismyipaddress.com
(NB might be best to PM the Admin with the result, rather than disclose your real location by posting the output here) At a command line/terminal enter the text in bold below: ping oneclickchicks.com do you get a Reply or a timeout? nslookup oneclickchicks.com should return something like Name: oneclickchicks.com Address: 35.196.131.64 what happens if you enter this IP address into the address bar of your browser 35.196.131.64 this command will show the hops made to a website tracert oneclickchicks.com does it get to 35.196.131.64 NB: I would avoid pasting the full output of tracert here (send a PM to Admin instead), you may reveal too much about your location |
| The Following User Says Thank You to anonjohn For This Useful Post: | ||
|
#8
|
||||
|
||||
|
## Root Cause Analysis: forum.oneclickchicks.com inaccessible on Starlink
### The Problem The website `forum.oneclickchicks.com` (hosted at IP `35.196.131.64` on Google Cloud Platform) is being __blocked at the network/IP level by Starlink's infrastructure__. This is NOT a DNS issue. ### Evidence Found: 1. __DNS works fine__ — The domain resolves correctly to `35.196.131.64` across Starlink DNS, Google DNS (8.8.8.8), and Cloudflare DNS (1.1.1.1). Changing your DNS server will NOT fix this. 2. __Traceroute dies at Starlink's edge__ — Packets travel through your router (192.168.68.1) → Starlink CGNAT (100.64.0.1) → Starlink internal network → Starlink edge router (206.224.73.252) and then __completely drop__. The packets never leave Starlink's network. 3. __IP-level blocking, not domain-level__ — Connecting directly to the raw IP `35.196.131.64` (bypassing DNS entirely) also times out, confirming the block is at the IP/routing level. 4. __Multiple GCP IP ranges affected__ — Testing showed that several Google Cloud IP ranges (35.192.x.x, 35.196.x.x, 35.200.x.x, 35.208.x.x) are unreachable through Starlink, while other GCP ranges (35.190.x.x, 35.199.x.x, 34.120.x.x) work fine. This pattern suggests __Starlink has a routing/peering issue with certain Google Cloud data center regions__ (likely GCP `us-east1` where 35.196.x.x is hosted), or is intentionally null-routing traffic to these ranges. ### Most Likely Explanation: This is either: - __A BGP routing/peering issue__ between Starlink (AS14593) and Google Cloud's specific regional endpoints — certain GCP regions are unreachable because Starlink doesn't have proper routes to them, OR - __Intentional IP range blocking__ by Starlink, possibly related to abuse complaints associated with these IP ranges. ### Workarounds: 1. __Use a VPN__ — This is the most reliable fix. Any VPN will tunnel your traffic outside Starlink's network before it reaches the GCP IP, bypassing the block entirely. 2. __Use a web proxy__ — Services like a SOCKS5 proxy or web-based proxy can route around the block. 3. __Contact Starlink support__ — Report that GCP IP range 35.196.0.0/16 is unreachable from their network and ask them to investigate their routing tables. Reference the traceroute dying at `206.224.73.252`. 4. __Tor Browser__ — Will route traffic through the Tor network, bypassing Starlink's routing entirely. |
| The Following User Says Thank You to camoj For This Useful Post: | ||
![]() |
| Thread Tools | Search this Thread |
|
|