[Toys] Home made dildo machine.

[seniornicks]

We have all seen those dildo machines on TV but have you ever made one?
I did once using a sabre saw.
One brand new saw, I removed the saw blade attachment parts from the end.
I got the largest dildo on the shelf from the local adult shop, a fat 10 inch job.
I used a piece of aluminium rod 1/2 in diameter and about 8 inch long.
By filing and drilling I formed an end on the rod that could be attached to the saw.
I drilled a small diameter hole in to the dildo so the other end of the rod could be stuffed into it by 5 or 6 inches.
The latex held a good grip on the rod without having to use glue to keep it fixed.
The result was an impressive looking mains powered dildo that with the alu rod up the centre gave a good impression af a giant hard cock.
I had used the dildo on the mrs before making the machine so I knew her vag could take it albeit with a bit of bucking and gasping - and some lube.
Sadly the speed of the saw was the issue that killed it off.
She could take the big hard cock with lube but she said the speed of it made her feel it was going to pull her insides out.
Even on the lowest setting it was pretty fast.
I did enjoy using it on her though the few times we used it.
Watching her brace and grimace, grabbing and squeezing her own tits while it was fucking her was a turn on.

[Helenv]

Wish my husband was more handy

[blackesteyes]

Originally Posted by Helenv

Wish my husband was more handy

Call George Clooney, IIRC he built a nice machine in the movie "Burn After Reading".

He's probably busy but if you haven't seen the film it's hilarious, check it out.

[seniornicks]

Originally Posted by Helenv

Wish my husband was more handy

Have a go yourself.
With mains power no chance of batteries running flat.
Also,seems more horny than battery power tools somehow..

[shoeripoff6]

I did this once. It was like a sybian, but unlike the sybian whick only vibrates, this had a fucking motion too. The vibe part was a standard jelly type vibrator, and the mechanics for the fucking motion was from a windscreen motor assembly from an old ford. It sat in the garage for years as the wife was never in the mood for it, and eventually i threw it away unused.

[joelo]

Very inventive. For next time.....consider the router speed controller at Harbor Freight.

harbor frei ght.c om/
router-speed-control-43060.html

I heard about it in relation to people wanting to modify the action of a Hitachi vibrator.